Renault Clio: Boot storage
Mobile floor

When fitted to the vehicle, it can be
used to make loading easier.
Note: if you need to access the ISOFIX
ring and/or the net ring at the bottom of
the boot, open flap 3.
Maximum weight for the mobile
floor: 100 kg evenly distributed. |
Movable floor storage

- Lower section 1 onto section 2;
- lift the assembly and position it
against the back of the rear bench
seat;
- push the catch 4 to lock the mobile
floor in the folded position.
Removing the mobile floor

- Lower section 1 onto section 2;
- remove the assembly.
Repositioning the mobile floor
Position it in the boot, using the 5 runners
provided.
READ NEXT:
Always position the objects transported
so that the largest surface is against:
The rear bench seatback for normal
loads (example A).
The front seatbacks with the rear
seatbacks
Permissible nose weight, maximum
permissible towing weight,
braked and unbraked: refer to
the information on “Weights” in
Section 6.
For fitting and conditions of use,
SEE MORE:
Electric window: List and location of components
ELECTRIC FRONT WINDOW or ONE-TOUCH ELECTRIC FRONT WINDOW or PASSENGER
ELECTRIC ONETOUCH
WINDOW CONTROL, and ELECTRIC REAR WINDOW
UCH
Driver's window lift
switch board
Passenger window lift
switch board
Rear window lift switch
board
I - UCH
K4M, and DP0
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove:
the scuttle panel grille (see Scuttle panel grille:
Removal - Refitting) (MR 393, 56A, Exterior
equipment),
the scoop under the scuttle panel grille (see Scoop
under the scuttle panel grille: Removal - Refitting)
(MR 393,
© 2016-2025 Copyright Renault Clio Owners Club
