Renault Clio: Front left-hand wiring: Connector access

I - LOCATION OF CONNECTORS

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

II - ACCESS TO CONNECTORS

IMPORTANT

Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 88A, Wiring harness, Wiring: Precautions for the repair, 88A-5).

WARNING

To prevent damaging the connectors, consult the disconnection procedure (see Connector: Disconnection and reconnection) (Technical Note 6015A, 88A, Wiring).

1 - Access to the R 107 connectors

LEFT-HAND DRIVE

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

RIGHT-HAND DRIVE

Renault Clio. Front left-hand wiring

2 - Access to the R 374 connector

Renault Clio. Front left-hand wiring

3 - Access to the R 67 connector

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

4 - Access to the R 33 connector

Renault Clio. Front left-hand wiring

READ NEXT:

 Front left-hand wiring: Removal - Refitting

LEFT-HAND DRIVE IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 88A, Wiring harness, Wiring: Precautions for the repair, 88A-5).

 Engine wiring: Connector access

I - LOCATION OF CONNECTORS R 67 connector (Engine wiring harness/front left-hand wiring connection). Depending on the engine, connection R 67 is composed of three or four connectors. K4J or K4

 Engine wiring: Removal - Refitting

SEE MORE:

 Diesel filter: Removal - Refitting

K9K REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the front right-hand wheel (see Wheel: Removal - Refitting) (MR 392, 35A, Wheels and tyres), the right-hand wheel arch liner (see Front wheel arch liner: Removal - Refitting) (MR 393, 55A, Exterior protection). II - OPERATION FOR

 Parking sensor

Operating principle Ultrasonic detectors, installed in the rear bumper (depending on the vehicle), measure the distance between the vehicle and an obstacle whilst reversing. This measurement is indicated by beeps which become more frequent the closer you come to the obstacle, until they be

© 2016-2025 Copyright Renault Clio Owners Club