Renault Clio: Input shaft lip seal: Removal - Refitting

Renault Clio III (2005-2013) Service Manual / Transmission / Manual Gearbox / Input shaft lip seal: Removal - Refitting

JH3 or JR5

TL4

Renault Clio. Input shaft lip seal: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

II - OPERATION FOR REMOVAL OF PART CONCERNED

WARNING

Do not scratch the shaft or mating face.

Renault Clio. Input shaft lip seal: Removal - Refitting

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

Renault Clio. Input shaft lip seal: Removal - Refitting

II - FINAL OPERATION

READ NEXT:

 Differential output seal: Removal - Refitting

JH3 or JR5 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect the battery (see Batter

 Reverse gear switch: Removal - Refitting

TL4 REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the battery (see Battery: Removal - Refitting) (80A, Battery), the battery tray (see Battery tray: Removal - Refitting) (80A, Battery).

 Sequential Gearbox

SEE MORE:

 Rear axle system: Tightening torque

Rear axle assembly: Adjustment values EQUIPMENT LEVEL E3 LEISURE or EQUIPMENT LEVEL EA1 or EQUIPMENT LEVEL EA2 or EQUIPMENT LEVEL EA3 or EQUIPMENT LEVEL EA4 or EQUIPMENT LEVEL EA5 or EQUIPMENT LEVEL EAG I - PRELIMINARY OPERATIONS Before checking the axles on the test bench, check the tyre press

 K4M, and JH3 - K4J, and JH3 - K4M, and TL4

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment). Remove: the battery (see Battery: Removal - Refitting) (80A, Battery), the battery tray (see Battery: Removal - Refitting) (80A, Battery), the

© 2016-2025 Copyright Renault Clio Owners Club