Renault Clio: Reverse gear switch: Removal - Refitting

TL4

REMOVAL

I - REMOVAL PREPARATION OPERATION

• Remove:
  • the battery (see Battery: Removal - Refitting) (80A, Battery),
  • the battery tray (see Battery tray: Removal - Refitting) (80A, Battery).

II - OPERATION FOR REMOVAL OF PART CONCERNED

• Disconnect the connector (1) from the reverse gear switch.

• Remove the reverse gear switch using the socket for removing/refitting the reverse gear switch (Bvi.1934) (2).

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

• Refit the reverse gear switch.
• Tighten the reverse gear switch using the socket for removing/refitting the reverse gear switch (Bvi.1934).
• Connect the reverse gear switch connector.

II - FINAL OPERATION

• Refit:
  • the battery tray (see Battery tray: Removal - Refitting) (80A, Battery),
  • the battery (see Battery: Removal - Refitting) (80A, Battery).

JH3 or JR5

REMOVAL

I - REMOVAL PREPARATION OPERATION

• Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment).
• Remove the engine undertray.

II - OPERATION FOR REMOVAL OF PART CONCERNED

• Disconnect the connector (1) from the reverse gear switch.

• Remove the reverse gear switch (2) using the (Bvi.1934).

Note: Seal the housing of the reverse gear switch while replacing the part.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

• Apply some SILICONE ADHESIVE SEALANT (see Vehicle: Parts and consumables for the repair) (04B, Consumables - Products) to the threading of the reverse gear switch.
• Refit the reverse gear switch using the (Bvi. 1934).
• Torque tighten the reverse gear switch (23 N.m).
• Connect the reverse gear switch connector.

II - FINAL OPERATION

• Fill the gearbox (see 21A, Manual gearbox, Manual gearbox oils: Draining - Filling, 21A-3).
• Refit the engine undertray.

READ NEXT: