Renault Clio: Front left-hand wiring: Connector access

I - LOCATION OF CONNECTORS

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

II - ACCESS TO CONNECTORS

IMPORTANT

Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 88A, Wiring harness, Wiring: Precautions for the repair, 88A-5).

WARNING

To prevent damaging the connectors, consult the disconnection procedure (see Connector: Disconnection and reconnection) (Technical Note 6015A, 88A, Wiring).

1 - Access to the R 107 connectors

LEFT-HAND DRIVE

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

RIGHT-HAND DRIVE

Renault Clio. Front left-hand wiring

2 - Access to the R 374 connector

Renault Clio. Front left-hand wiring

3 - Access to the R 67 connector

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

4 - Access to the R 33 connector

Renault Clio. Front left-hand wiring

READ NEXT:

 Front left-hand wiring: Removal - Refitting

LEFT-HAND DRIVE IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 88A, Wiring harness, Wiring: Precautions for the repair, 88A-5).

 Engine wiring: Connector access

I - LOCATION OF CONNECTORS R 67 connector (Engine wiring harness/front left-hand wiring connection). Depending on the engine, connection R 67 is composed of three or four connectors. K4J or K4

 Engine wiring: Removal - Refitting

SEE MORE:

 Sequential gearbox: Precautions for the repair

D4F or K9K, and JA3 or JA5 I - SEQUENTIAL GEARBOX WARNING If any operation is carried out on the electro-hydraulic unit, it is essential to clean the unit using a cleaning product and compressed air. Never leave the circuit open and never use a high pressure cleaner. II - SEQUENTIAL GEARBOX COMPUT

 Reverse gear switch: Removal - Refitting

TL4 REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the battery (see Battery: Removal - Refitting) (80A, Battery), the battery tray (see Battery tray: Removal - Refitting) (80A, Battery). II - OPERATION FOR REMOVAL OF PART CONCERNED Disconnect the connector (1) from the reverse

© 2016-2025 Copyright Renault Clio Owners Club