Renault Clio: Front side air distribution duct: Removal - Refitting

Renault Clio III (2005-2013) Service Manual / Air Conditioning / Heating / Front side air distribution duct: Removal - Refitting

Renault Clio. Front side air distribution duct: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

WITHOUT NAVIGATION AID, and RADIO NO. 01 or RADIO NO. 02 or RADIO NO. 03 or RADIO NO. 04 or RADIO NO. 05 or RADIO NO. 06

NAVIGATION AID 1

WITHOUT NAVIGATION AID, and VEHICLE WITHOUT RADIO

 

II - OPERATION FOR REMOVAL OF PART CONCERNED

1 - Front left-hand side air distribution duct:

Renault Clio. Front side air distribution duct: Removal - Refitting

2 - Front right-hand side air distribution duct:

Renault Clio. Front side air distribution duct: Removal - Refitting

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

1 - Front left-hand side air distribution duct:

Renault Clio. Front side air distribution duct: Removal - Refitting

2 - Front right-hand side air distribution duct:

Renault Clio. Front side air distribution duct: Removal - Refitting

II - FINAL OPERATION.

WITHOUT NAVIGATION AID, and RADIO NO. 01 or RADIO NO. 02 or RADIO NO. 03 or RADIO NO. 04 or RADIO NO. 05 or RADIO NO. 06

NAVIGATION AID 1

WITHOUT NAVIGATION AID, and VEHICLE WITHOUT RADIO

 

READ NEXT:

 Front centre air distribution duct: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Lock the airbag computer using the Diagnostic tool (see Fault finding - Replacement of components (MR 394, 88C, Airbags and pretensioners). Disconnect t

 Front footwell air distribution duct: Removal - Refitting

LEFT-HAND DRIVE REMOVAL I - REMOVAL PREPARATION OPERATION 1 - Driver's side Remove the centre console (see Centre console: Removal - Refitting) (MR 393, 57A, Interior equipment). Unclip the da

 Recirculation motor: Removal - Refitting

LEFT-HAND DRIVE, and CLIMATE CONTROL REMOVAL I - REMOVAL PREPARATION OPERATION Lock the airbag computer using the Diagnostic tool (see Fault finding - Replacement of components) ( MR 394, 88C, Ai

SEE MORE:

 Automatic gearbox: Removal - Refitting

K4M, and DP0 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment). Remove: the engine undertray, the front wheels (see Wheel: Removal - Refitting) (35A, Wheels and tyres), the front wheel arch liners

 Wheel trims - wheel

Remove the wheel trim using hubcap tool 1 (located in the tool kit) by engaging the hook in the opening near valve 2. To refit it, align it with valve 2. Push the retaining hooks in fully, starting with side A near the valve, followed by B and C, finishing at D opposite the valve.

© 2016-2025 Copyright Renault Clio Owners Club