Renault Clio: Front seat lower casing: Removal - Refitting

Renault Clio III (2005-2013) Service Manual / Trim And Upholstery / Front Seat Trim / Front seat lower casing: Removal - Refitting

WITHOUT SPORT SEATS, and DOCUMENTATION PHASE 2

Renault Clio. Front seat lower casing: Removal - Refitting

IMPORTANT

Before doing any work on a safety system component, be sure to lock the airbag computer using the Diagnostic tool (see Airbag and pretensioners: Precautions for the repair). When this function is activated, all the trigger lines are inhibited and the airbag warning light on the instrument panel is continuously lit (with the ignition on).

IMPORTANT

Never handle the pyrotechnic systems (pretensioners or airbags) near to a source of heat or naked flame - they may be triggered.

REMOVAL

I - REMOVAL PREPARATION OPERATION

FRONT SEAT TYPE 02 or FRONT SEAT TYPE 03 or FRONT SEAT TYPE 05

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Front seat lower casing: Removal - Refitting

FRONT SEAT WITH HEATING

 

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

FRONT SEAT WITH HEATING

 

II - FINAL OPERATION

FRONT SEAT TYPE 02 or FRONT SEAT TYPE 03 or FRONT SEAT TYPE 05

 

SPORT FRONT SEATS

REMOVAL

I - REMOVAL PREPARATION OPERATION

Front seat base exterior casing

Renault Clio. Front seat lower casing: Removal - Refitting

Renault Clio. Front seat lower casing: Removal - Refitting

II - REMOVAL OPERATION

1 - Front seat base exterior casing

Renault Clio. Front seat lower casing: Removal - Refitting

2 - Front seat base interior casing

Renault Clio. Front seat lower casing: Removal - Refitting

REFITTING

I - REFITTING PREPARATION OPERATION

II - REFITTING OPERATION

READ NEXT:

 Rear Seat Trim

1/3 and 2/3 rear bench seat base trim: Removal - Refitting REMOVAL I - REMOVAL PREPARATION OPERATION Lift up the rear bench seat base. Remove the rear bench seat base at (1). II - OPERATION FO

 Seat Accessories

Heated seat pad: Removal - Refitting WITHOUT SPORT SEATS, and DOCUMENTATION PHASE 1 REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the front seat (see 75A, Front seat frames and mechanisms, C

SEE MORE:

 Solenoid valves: Removal - Refitting

K9K, and JA5 REMOVAL I - REMOVAL PREPARATION OPERATION Note: Before removing the solenoid valves, always mark their respective connectors in order not to mix them up. IMPORTANT Before any operation on the sequential system, discharge the accumulator using the Diagnostic tool. To discharge the acc

 Coolant temperature sensor: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Disconnect the battery (see Battery: Removal - Refitting) (80A, Battery). Remove: the engine cover, the air intake sleeve. II - OPERATION FOR REMOVAL OF PART CONCERNED Disconnect the coolant temperature sensor connector (1). Unclip the retai

© 2016-2025 Copyright Renault Clio Owners Club