Renault Clio: Rear wing light: Removal - Refitting

B85 or C85 or S85

REMOVAL

OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Rear wing light: Removal - Refitting

REFITTING

REFITTING OPERATION FOR PART CONCERNED

Renault Clio. Rear wing light: Removal - Refitting

K85

REMOVAL

OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Rear wing light: Removal - Refitting

REFITTING

REFITTING OPERATION FOR PART CONCERNED

Renault Clio. Rear wing light: Removal - Refitting

READ NEXT:

 Rear light bulb: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Remove the rear light on the wing (see 81A, Rear lighting, Rear wing light: Removal - Refitting, 81A-5). B85 or C85 or S85, and DOCUMENTATION PHASE 1 U

 3rd brake light: Removal - Refitting

B85 or C85 or S85 REMOVAL OPERATION FOR REMOVAL OF PART CONCERNED Remove the blanking covers (1). Insert a screwdriver in the openings to move the clips (2). Apply pressure to the clips (2)

 High level brake light bulb: Removal - Refitting

K85 REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the tailgate spoiler (see Tailgate spoiler: Removal - Refitting), the high level brake light (see 81A, Rear lighting, 3rd brake light: Rem

SEE MORE:

 Engine stand: General description

IMPORTANT Use a repair bench to ensure the positioning of the points and the geometry of the axle assemblies. Note: The information contained in the following describes the general repair procedure for all vehicles having the same design for this part. Before reading this general information, check

 Rear brake hose: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING Prepare for brake fluid outflow, to prevent damage to the mechanical parts and bodywork around the braking system. Fit the pedal press

© 2016-2025 Copyright Renault Clio Owners Club