Renault Clio: Front side door trim: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove the front speaker (see Front speakers:
Removal - Refitting) (MR 392, 86A, Radio).

- Unclip the door mirror trim piece (1).
II - OPERATION FOR REMOVAL OF PART
CONCERNED

- Use a flat-blade screwdriver to undo the trim piece (2).


- Remove trim and bolt.
- Take out interior handle (4) (depending on equipment
level).
- Disconnect the supply connectors.
Note:
For vehicles fitted with manual window winders,
protect the door trim and remove the winder handle
using an unclipping tool.


- Remove the bolts (6).
- Unclip:
- trim using a pair of unclipping pliers (protect the
door box section),
- the interior door handle cable using a flat-blade
screwdriver.
- Disconnect the supply connectors.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Reconnect the supply connectors.
- Reclip:
- the interior door handle cable,
- the door trim.




- Reconnect the supply connector.
- Reclip the trim piece (10).
II - FINAL OPERATION
- Refit the front speaker (see Front speakers: Removal
- Refitting) (MR 392, 86A, Radio).

- Reclip:
- the door mirror trim piece (11),
- window winder handle (if fitted in vehicle).
- Carry out a function test.
READ NEXT:
B85 or K85
REMOVAL
I - REMOVAL PREPARATION OPERATION
Special features of vehicles fitted with manual
window winders
Unclip the winder handle (1) using a pair of unclipping
pliers (protect the door
WITHOUT SPORT SEATS, and DOCUMENTATION PHASE 2
IMPORTANT
Before beginning work on any component of the
safety system, it is essential to lock the airbag computer
using the Diagnostic tool (see Airbag
SEE MORE:
K4M, and DP0
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove the gearbox (see 23A, Automatic gearbox,
Automatic gearbox: Removal - Refitting, 23A-7).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
Set up the (Mot. 582-01) (2).
Remove:
the bolts (2),
the drive plate,
tool (Mot. 582-01).
D4F, and 740 or 742 or 764
WARNING
Do not use any product designed to improve the
electrical contact in the injection computer and oxygen
sensor connectors or on the bodies of the oxygen
sensors. Failure to respect this advice prevents
the oxygen sensor from operating correctly and
results in failu
© 2016-2025 Copyright Renault Clio Owners Club
