Renault Clio: Exhaust: List and location of components
Renault Clio III (2005-2013) Service Manual / Engine And Peripherals / Exhaust / Exhaust: List and location of components
PIPE ASSEMBLY
D4F, and 740 or 742 or 764
(ZC1) cutting area between the catalytic
converter and the expansion
chamber
(ZC2) cutting area between the expansion
chamber and the silencer
D4F, and 784 or 786
(ZC1) cutting area between the expansion chamber and the silencer
K4J
(ZC1) cutting area between the catalytic
converter and the expansion
chamber
(ZC2) cutting area between the expansion
chamber and the silencer
K4M
(ZC1) cutting area between the catalytic
converter and the expansion
chamber
(ZC2) cutting area between the expansion
chamber and the silencer
M4R
(ZC1) cutting area between the catalytic
converter and the expansion
chamber
(ZC2) cutting area between the expansion
chamber and the silencer
F4R
(ZC1) cutting area between the catalytic
converter integrated into the
exhaust pipe and the expansion
chamber
(ZC2) cutting area between the expansion
chamber and the silencer
K9K, and 764
(ZC1) cutting area between the expansion
chamber inlet pipe and the
expansion chamber
(ZC2) cutting area between the expansion
chamber and the silencer
K9K, and 750 or 752 or 760 or 762 or 766 or 768
(ZC1) cutting area between the intermediate
pipe inlet pipe and the
intermediate pipe
(ZC2) cutting area between the intermediate
pipe and the silencer
K9K, and 772
(ZC1) cutting area between the particle
filter and the intermediate pipe
(ZC2) cutting area between the intermediate
pipe and the silencer
READ NEXT:
Exhaust: Precautions for the repair
I - PARTS AND CONSUMABLES FOR THE REPAIR
1 - Parts always to be replaced:
the exhaust trunking (if fitted)
the seal or sealing ring on the connection between the
catalytic converter or catalytic
Catalytic pre-converter: Removal - Refitting
K9K, and 772
PARTS AND CONSUMABLES FOR THE
REPAIR WORK
Parts always to be replaced:
the seal between the catalytic pre-converter and
the turbocharger,
the seal between the catalytic pre-conve
Catalytic converter: Removal - Refitting
K4J or K4M
IMPORTANT
Catalytic converters contain ceramic fibres: these
are contained within a closed unit, and cannot disperse.
Cutting or drilling catalytic converters is prohibited.
REMOVAL
I - R
SEE MORE:
Anti-submarining airbag: Removal - Refitting
C85
IMPORTANT
Consult the safety and cleanliness advice and operation
recommendations before carrying out any
repair (see 88C, Air bag and Pretensioners, Airbag
and pretensioners: Precautions for the
repair, 88C-6).
REMOVAL
I - REMOVAL PREPARATION OPERATION
IMPORTANT
It is essential to lock the air
Engine oil grade
Refer to the Maintenance Service
Booklet for your vehicle.
Filling: take care when
topping up the oil that
no oil drips onto engine
components - risk of fire.
Remember to refit the cap securely
as there is a risk of fire if oil splashes
onto hot engine components.
