Renault Clio: Battery for remote door locking control: Removal - Refitting

Renault Clio III (2005-2013) Service Manual / Electrical Equipment / Engine Immobiliser / Battery for remote door locking control: Removal - Refitting

REMOVAL

OPERATION FOR REMOVAL OF PART CONCERNED

VEHICLE WITH KEY

Renault Clio. Battery for remote door locking control: Removal - Refitting

Renault Clio. Battery for remote door locking control: Removal - Refitting

VEHICLE WITH CARD

Renault Clio. Battery for remote door locking control: Removal - Refitting

REFITTING

I - REFITTING PREPARATION OPERATION

WARNING

To ensure that the remote control operates correctly, take care not to damage the battery contacts.

Only handle the new battery with dry, grease-free hands or wearing clean gloves to avoid any risk of dirt and oxidation on the battery.

II - REFITTING OPERATION FOR PART CONCERNED

VEHICLE WITH KEY

Renault Clio. Battery for remote door locking control: Removal - Refitting

VEHICLE WITH CARD

Renault Clio. Battery for remote door locking control: Removal - Refitting

III - FINAL OPERATION.

VEHICLE WITH KEY

VEHICLE WITH CARD

READ NEXT:

 Card reader: Removal - Refitting

VEHICLE WITH CARD REMOVAL I - REMOVAL PREPARATION OPERATION Remove the centre console (see Centre console: Removal - Refitting) (MR 393, 57A, Interior equipment). Unclip the trim at (1) and (2

 Instrument Panel

Clock: Before/after repair procedure SETTING THE CLOCK WITHOUT NAVIGATION AID, and RADIO NO. 01 or RADIO NO. 02 or RADIO NO. 03 or RADIO NO. 04 or RADIO NO. 05 or RADIO NO. 06 or RADIO NO. 07 or RADIO

 On-board Telematics System

SEE MORE:

 Interior Lighting

Interior lighting: Function I - GENERAL INFORMATION Vehicles may be fitted with the following units for lighting the interior of the passenger compartment, depending on the level of equipment: a courtesy light (front central zone), a courtesy light (rear central zone), courtesy mirror lights (dr

 Pump assembly reservoir: Removal - Refitting

K9K, and JA5 REMOVAL I - REMOVAL PREPARATION OPERATION IMPORTANT Before any operation on the sequential system, discharge the accumulator using the Diagnostic tool. To discharge the accumulator, run command " Discharge pressure accumulator " AC081. To confirm the pressure drop, read the " Hydr

© 2016-2025 Copyright Renault Clio Owners Club