Renault Clio: Towing, attachments

Renault Clio. Towing, attachments


Permissible nose weight, maximum permissible towing weight, braked and unbraked: refer to the information on “Weights” in Section 6.

For fitting and conditions of use, refer to the equipment’s fitting instructions.

Please keep these instructions with the rest of the vehicle documentation.

Renault Clio. Towing, attachments


A: 697 mm (5-door version).

A: 697 mm (Utility version).

A: 948 mm (Estate version).

If the towbar ball obscures the registration plate or the rear fog lights, it should be removed when not in use.

In all cases, comply with local legislation.

READ NEXT:

 Luggage net

Luggage net A On equipped vehicles, this can be used when transporting animals or luggage, to separate them from the passenger section. It can be positioned: behind the front seats; b

 Roof bars/Spoiler

Accessing the mounting points Open the doors to access the mounting points 1. If original roof bars, approved by our Technical Department, are supplied with screws, only use the

 Multimedia equipment

The presence and location of this equipment depends on the vehicle version. Multimedia touchscreen; Multimedia sockets; Steering column control; Voice commands; Microphone. Refe

SEE MORE:

 Exhaust fuel injector cooler: Removal - Refitting

K9K, and 772 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02, Lifting equipment). Apply the discharge procedure for the exhaust injector fuel supply system (see 19B, Exhaust, Exhaust fuel injector: Removal - Refit

 Clutch thrust bearing: Removal - Refitting

The thrust bearing is connected to the clutch slave cylinder. REMOVAL I - REMOVAL PREPARATION OPERATION Drain the brake reservoir using a syringe to remove the clutch thrust bearing and control. Remove the gearbox (see 21A, Manual gearbox, Manual gearbox: Removal - Refitting, 21A- 12). II - R

© 2016-2025 Copyright Renault Clio Owners Club