Renault Clio: Rear loading trim: Removal - Refitting
S85
REMOVAL
I - REMOVAL PREPARATION OPERATION

- Remove:
- the rear parcel shelf,
- the centre rear parcel shelf (1).
II - OPERATION FOR REMOVAL OF PART
CONCERNED

- Unclip the clips (2).
- Remove the rear end panel central trim assembly.

- Unclip the clips (3).
- Remove the emergency spare wheel flap (4).

- Remove:
- the bolts (5),
- the retaining hooks.


- Remove:
- the bolts (7),
- the centre rear parcel shelf supports.


- Gently lift the luggage compartment tray (9).


- Detach the rear side sections (11) of the luggage
compartment.
- Remove the luggage compartment tray through the
tailgate by bending it slightly (this operation requires
two people).

- Remove the soundproofing.

- Remove the luggage compartment tray mounting (12).

- Remove:
- the bolt (13),
- the load stop bracket.


- Remove the load stop floor by unclipping it towards
the rear (15) (this operation requires two people).
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Refit:
- the load stop floor (this operation requires two people),
- the bolts (14),
- the load stop bracket,
- the bolt (13),
- the luggage compartment tray mounting (12),
- the soundproofing,
- the luggage compartment tray (this operation requires
two people),
- the trim (10),
- the bolts (8).
- Attach the rear side sections (11) of the luggage
compartment tray.
- Refit:
- the centre rear parcel shelf supports,
- the bolts (7) and (6),
- the retaining hooks,
- the bolts (5),
- the emergency spare wheel flap (4).
- Attach the clips (3).
- Refit the rear end panel central trim assembly.
- Attach the clips (2).
II - FINAL OPERATION.
- Refit:
- the centre rear parcel shelf, (1)
- the rear parcel shelf.
READ NEXT:
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove the front speaker (see Front speakers:
Removal - Refitting) (MR 392, 86A, Radio).
Unclip the door mirror trim piece (1).
II - OPERATION FOR REM
B85 or K85
REMOVAL
I - REMOVAL PREPARATION OPERATION
Special features of vehicles fitted with manual
window winders
Unclip the winder handle (1) using a pair of unclipping
pliers (protect the door
SEE MORE:
REMOVAL
I - REMOVAL PREPARATION OPERATION
Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 392, 02, Lifting equipment).
Remove the engine undertray.
Cut the exhaust pipe (see ) and (see 19B, Exhaust, Exhaust: Precautions
for the repair, 19B- 19).
II - OPERATION
EQUIPMENT LEVEL E3 LEISURE or EQUIPMENT LEVEL EA1 or EQUIPMENT LEVEL EA2
or EQUIPMENT
LEVEL EA3 or EQUIPMENT LEVEL EA4 or EQUIPMENT LEVEL EA5 or EQUIPMENT LEVEL EAG
WARNING
Never use the rear axle as support for a lifting system.
REMOVAL
I - REMOVAL PREPARATION OPERATION
Position the vehicle on
© 2016-2025 Copyright Renault Clio Owners Club
