Renault Clio: Door mirror: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

• Unclip the trim (1).

II - OPERATION FOR REMOVAL OF PART CONCERNED

• Remove:
  • the sealing foam (2),
  • the bolts (3)
  • the door mirror.
• Disconnect the supply connectors (depending on equipment level).

SCHOOL VEHICLE

• Unclip the casing (4).

• Remove the bolts (5).
• Remove the door mirror.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

• Connect the supply connector (depending on equipment level).
• Refit:
  • the door mirror,
  • the bolts (6),
  • the sealing foam.

SCHOOL VEHICLE

• Position the door mirror.
• Refit the door mirror bolts.
• Clip the casing in place.

II - FINAL OPERATION

• Clip the trim piece in place (7).

Door mirror casing: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

• Remove the door mirror glass (see 56A, Exterior equipment, Door mirror glass: Removal - Refitting, 56A-16).

II - REMOVAL OPERATION FOR PART CONCERNED

• Unclip the clips (1).
• Fold in the door mirror.

• Unclip the door mirror casing.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

• Reclip the door mirror casing in position.

II - FINAL OPERATION

• Refit the door mirror glass (see 56A, Exterior equipment, Door mirror glass: Removal - Refitting, 56A-16).

SCHOOL VEHICLE

REMOVAL

I - REMOVAL PREPARATION OPERATION

• Remove the door mirror glass (see 56A, Exterior equipment, Door mirror glass: Removal - Refitting, 56A-16).

• Unclip the casing (1).

• Remove the bolts (2).
• Remove the door mirror.

II - OPERATION FOR REMOVAL OF PART CONCERNED

• Unclip clips (3).
• Fold in the door mirror.

• Unclip the door mirror casing.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

• Clip on the door mirror casing.

II - FINAL OPERATION

• Offer up the door mirror.
• Refit the bolts (4).
• Clip on the casing
• Refit the door mirror glass (see 56A, Exterior equipment, Door mirror glass: Removal - Refitting, 56A-16).

Door mirror glass: Removal - Refitting

REMOVAL

OPERATION FOR REMOVAL OF PART CONCERNED

• Unclip the door mirror glass using the (Car. 1363).
• Disconnect the supply connectors (depending on the equipment level).

REFITTING

REFITTING PREPARATION OPERATION

• Connect the supply connectors (depending on the equipment level).
• Clip the door mirror glass in position.

READ NEXT: