{MAINCONT}

Renault Clio: Wheel trims - wheel

Renault Clio. Wheel trims - wheel


Remove the wheel trim using hubcap tool 1 (located in the tool kit) by engaging the hook in the opening near valve 2.

To refit it, align it with valve 2. Push the retaining hooks in fully, starting with side A near the valve, followed by B and C, finishing at D opposite the valve.

Do not leave the tools unsecured inside the vehicle as they may come loose under braking. After use, check that all the tools are correctly clipped into the tool kit, then position it correctly in its housing: risk of injury.

READ NEXT:

 Changing a wheel

Switch on the hazard warning lights. Keep the vehicle away from traffic and on a level surface where it will not slip. Apply the parking brake and engage a gear (first or

 Tyres (tyre and wheel safety, use in winter)

Tyre and wheel safety The tyres are the only contact between the vehicle and the road, so it is essential to keep them in good condition. You must comply with the local rules given in the highway

 Headlights (changing bulbs)

Direction indicator lights Turn the bulb holder 1 a quarter of a turn and take out the bulb. Bulb type: PY24. Once the bulb has been replaced, check that it is properly secured. T

SEE MORE:

  Airbag and pretensioners: List and location of components

I - LISTS OF COMPONENTS list of components Driver and passenger front airbags (1). C85 or S85 Anti-submarining airbags located in the base of the front seats (2). B85 or K85 Front buckle pretensioners located on the outside of the seat (3). FRONT SIDE AIRBAG Front chest-level side airbag located in

  Airbag and pretensioners: Precautions for the repair

I - PRECAUTIONS FOR REPAIR IMPORTANT All operations on airbag and pretensioner systems must be carried out by qualified trained personnel. The airbags have a pyrotechnic gas generator, with an ignition module and bag which must not be separated. The pretensioners have a pyrotechnic gas generator

{VIDEOCONT}
© 2016-2026 Copyright Renault Clio Owners Club - 0.0034