{MAINCONT}

Renault Clio: Wheel trims - wheel

Renault Clio. Wheel trims - wheel


Remove the wheel trim using hubcap tool 1 (located in the tool kit) by engaging the hook in the opening near valve 2.

To refit it, align it with valve 2. Push the retaining hooks in fully, starting with side A near the valve, followed by B and C, finishing at D opposite the valve.

Do not leave the tools unsecured inside the vehicle as they may come loose under braking. After use, check that all the tools are correctly clipped into the tool kit, then position it correctly in its housing: risk of injury.

READ NEXT:

 Changing a wheel

Switch on the hazard warning lights. Keep the vehicle away from traffic and on a level surface where it will not slip. Apply the parking brake and engage a gear (first or

 Tyres (tyre and wheel safety, use in winter)

Tyre and wheel safety The tyres are the only contact between the vehicle and the road, so it is essential to keep them in good condition. You must comply with the local rules given in the highway

 Headlights (changing bulbs)

Direction indicator lights Turn the bulb holder 1 a quarter of a turn and take out the bulb. Bulb type: PY24. Once the bulb has been replaced, check that it is properly secured. T

SEE MORE:

  Boot

To open Press button 1 and lift the tailgate. To close Lower the tailgate using the handles 2 inside the tailgate to help you Opening the doors manually from the inside If it is impossible to unlock the tailgate, it can be done manually from inside: access the luggage compartment

  Rear parcel shelf

Removal Lower the rear headrests; unhook the two cords 1 from the boot door; lift the parcel shelf 2 to half height in order to unclip it (movement A); push the shelf in (B movement) and turn it; pull the shelf towards you. To refit, proceed in the reverse order to

{VIDEOCONT}
© 2016-2026 Copyright Renault Clio Owners Club - 0.0053