{MAINCONT}

Renault Clio: Wheel trims - wheel

Renault Clio. Wheel trims - wheel


Remove the wheel trim using hubcap tool 1 (located in the tool kit) by engaging the hook in the opening near valve 2.

To refit it, align it with valve 2. Push the retaining hooks in fully, starting with side A near the valve, followed by B and C, finishing at D opposite the valve.

Do not leave the tools unsecured inside the vehicle as they may come loose under braking. After use, check that all the tools are correctly clipped into the tool kit, then position it correctly in its housing: risk of injury.

READ NEXT:

 Changing a wheel

Switch on the hazard warning lights. Keep the vehicle away from traffic and on a level surface where it will not slip. Apply the parking brake and engage a gear (first or

 Tyres (tyre and wheel safety, use in winter)

Tyre and wheel safety The tyres are the only contact between the vehicle and the road, so it is essential to keep them in good condition. You must comply with the local rules given in the highway

 Headlights (changing bulbs)

Direction indicator lights Turn the bulb holder 1 a quarter of a turn and take out the bulb. Bulb type: PY24. Once the bulb has been replaced, check that it is properly secured. T

SEE MORE:

  Fuses

Fuses: List and location of components Passenger compartment fuse and relay box Consumer cut-out fuse Additional relay/fuse box Battery protection fuses Protection and switching unit Power supply fuse board Optional relay unit I - PASSENGER COMPARTMENT FUSE AND RELAY BOX LEFT-HAND DRIVE O

  Immobiliser system: List and location of components

I - LIST OF COMPONENTS II - LOCATION OF COMPONENTS VEHICLE WITH KEY 1 - Antenna/Transponder ring 2 - Ignition switch 3 - UCH 4 - Key VEHICLE WITH CARD 5 - Front starting aerial 6 - Central starting aerial 7 - Rear starting aerial 8 - Start button 9 - Card reader 10 - UCH 11 - Electric ste

{VIDEOCONT}
© 2016-2026 Copyright Renault Clio Owners Club - 0.0033