{MAINCONT}

Renault Clio: Electric steering column lock: Removal - Refitting

Renault Clio III (2005-2013) Service Manual / Electrical Equipment / Engine Immobiliser / Electric steering column lock: Removal - Refitting

Renault Clio. Electric steering column lock: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

Renault Clio. Electric steering column lock: Removal - Refitting

Renault Clio. Electric steering column lock: Removal - Refitting

Renault Clio. Electric steering column lock: Removal - Refitting

Renault Clio. Electric steering column lock: Removal - Refitting

Renault Clio. Electric steering column lock: Removal - Refitting

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Electric steering column lock: Removal - Refitting

Renault Clio. Electric steering column lock: Removal - Refitting

WARNING

The electric steering column lock mounting bolt has a left-hand thread, it is unscrewed in the opposite direction.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

CODING OF THE ELECTRIC STEERING COLUMN LOCK.

Note: The electric lock is supplied without a code. The engine immobiliser code must be programmed when it is fitted to allow the ignition to be switched on.

WARNING

The injection computer retains the immobiliser code for life.

The system has no security code.

It is forbidden to perform tests with computers borrowed from the Parts Department or from another vehicle which must then be returned.

These computers are permanently coded.

Note: The electric steering column lock locks the steering column after a few seconds; coding is then complete. The red immobiliser warning light flashes to indicate that the engine immobiliser function is active.

II - FINAL OPERATION.

READ NEXT:

 Battery for remote door locking control: Removal - Refitting

REMOVAL OPERATION FOR REMOVAL OF PART CONCERNED VEHICLE WITH KEY Remove the bolt (1). Open the key with a coin (2). VEHICLE WITH CARD Remove the mechanical insert (3). REFITTING I - REFITT

 Card reader: Removal - Refitting

VEHICLE WITH CARD REMOVAL I - REMOVAL PREPARATION OPERATION Remove the centre console (see Centre console: Removal - Refitting) (MR 393, 57A, Interior equipment). Unclip the trim at (1) and (2

 Instrument Panel

Clock: Before/after repair procedure SETTING THE CLOCK WITHOUT NAVIGATION AID, and RADIO NO. 01 or RADIO NO. 02 or RADIO NO. 03 or RADIO NO. 04 or RADIO NO. 05 or RADIO NO. 06 or RADIO NO. 07 or RADIO

SEE MORE:

  Diesel injection: Precautions for the repair

K9K I - RISKS RELATING TO CONTAMINATION The high-pressure direct injection system is highly sensitive to contamination. The risks caused by contamination are: damage to or destruction of the high pressure injection system, a component seizing, a component not being properly sealed. All After-S

  Diesel injection: List and location of components

K9K, and 750 or 760 or 762 or 764 or 766 or 768 High pressure pump Flow regulation solenoid valve Pressure regulation solenoid valve Diesel temperature sensor Spacer between the cylinder head and the injector clamp Injector clamp Diesel injector fuel return pipe Diesel injector High pre

{VIDEOCONT}
© 2016-2026 Copyright Renault Clio Owners Club - 0.0054