{MAINCONT}

Renault Clio: Rear air distribution duct: Removal - Refitting

Renault Clio III (2005-2013) Service Manual / Air Conditioning / Heating / Rear air distribution duct: Removal - Refitting

Renault Clio. Rear air distribution duct: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

Renault Clio. Rear air distribution duct: Removal - Refitting

1 - Rear left-hand air distribution duct

2 - Rear right-hand air distribution duct

II - OPERATION FOR REMOVAL OF PART CONCERNED

1 - Rear left-hand air distribution duct

Renault Clio. Rear air distribution duct: Removal - Refitting

2 - Rear right-hand air distribution duct

Renault Clio. Rear air distribution duct: Removal - Refitting

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

1 - Rear left-hand air distribution duct

Renault Clio. Rear air distribution duct: Removal - Refitting

2 - Rear right-hand air distribution duct

Renault Clio. Rear air distribution duct: Removal - Refitting

II - FINAL OPERATION.

1 - Rear left-hand air distribution duct

2 - Rear right-hand air distribution duct

READ NEXT:

 Recirculation control cable: Removal - Refitting

LEFT-HAND DRIVE, and AIR CONDITIONING or STANDARD HEATING REMOVAL I - REMOVAL PREPARATION OPERATION Partially remove seal (1). Remove the side panel (2). Remove the bolt (3) from the base

 Air distribution cable: Removal - Refitting

LEFT-HAND DRIVE, and AIR CONDITIONING or STANDARD HEATING REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the glovebox (see Glovebox: Removal - Refitting) (MR 393, 57A, Interior equipment),

 Air mixing cable: Removal - Refitting

LEFT-HAND DRIVE, and AIR CONDITIONING or STANDARD HEATING REMOVAL I - REMOVAL PREPARATION OPERATION Partially remove seal (1). Remove the side panel (2). Remove the bolt (3) from the base

SEE MORE:

  Front hub carrier bearing: Removal - Refitting

EQUIPMENT LEVEL E3 LEISURE or EQUIPMENT LEVEL EA1 or EQUIPMENT LEVEL EA2 or EQUIPMENT LEVEL EA3 or EQUIPMENT LEVEL EA4 or EQUIPMENT LEVEL EA5 or EQUIPMENT LEVEL EAG WARNING In order to prevent irreversible damage to the front hub bearing: Do not loosen or tighten the driveshaft nut when the whee

  Front shock absorber and spring: Removal - Refitting

EQUIPMENT LEVEL E3 LEISURE or EQUIPMENT LEVEL EA1 or EQUIPMENT LEVEL EA2 or EQUIPMENT LEVEL EA3 or EQUIPMENT LEVEL EA4 or EQUIPMENT LEVEL EA5 or EQUIPMENT LEVEL EAG REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A,

{VIDEOCONT}
© 2016-2026 Copyright Renault Clio Owners Club - 0.0035