Renault Clio: Mixing motor: Removal - Refitting

LEFT-HAND DRIVE, and CLIMATE CONTROL

Renault Clio. Mixing motor: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

Renault Clio. Mixing motor: Removal - Refitting

Renault Clio. Mixing motor: Removal - Refitting

Renault Clio. Mixing motor: Removal - Refitting

Renault Clio. Mixing motor: Removal - Refitting

Renault Clio. Mixing motor: Removal - Refitting

Renault Clio. Mixing motor: Removal - Refitting

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Mixing motor: Removal - Refitting

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

Renault Clio. Mixing motor: Removal - Refitting

II - FINAL OPERATION.

Renault Clio. Mixing motor: Removal - Refitting

Note: Check the presence of the rubber filter block on the dashboard cross member reinforcement plate before refitting.

Note: Check that the floor carpet reaches under the accelerator pedal end-stop.

RIGHT-HAND DRIVE, and CLIMATE CONTROL

REMOVAL

I - REMOVAL PREPARATION OPERATION

Renault Clio. Mixing motor: Removal - Refitting

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Mixing motor: Removal - Refitting

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

Renault Clio. Mixing motor: Removal - Refitting

II - FINAL OPERATION.

READ NEXT:

 Distribution motor: Removal - Refitting

LEFT-HAND DRIVE, and CLIMATE CONTROL REMOVAL I - REMOVAL PREPARATION OPERATION Remove the centre console (see Centre console: Removal - Refitting) (MR 393, 57A, Interior equipment). Unclip the

 Passenger compartment temperature sensor: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Unclip the upper casing. Unclip the lower casing (1). II - OPERATION FOR REMOVAL OF PART CONCERNED Disconnect the passenger compartment temperature

 Air Conditioning

SEE MORE:

 K4M, and JH3 - K4J, and JH3 - K4M, and TL4

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment). Remove: the battery (see Battery: Removal - Refitting) (80A, Battery), the battery tray (see Battery: Removal - Refitting) (80A, Battery), the

 Timing chain: Removal - Refitting

M4R REMOVAL I - REMOVAL PREPARATION OPERATION IMPORTANT To avoid all risk of damage to the systems, apply the safety and cleanliness instructions and operation recommendations before carrying out any repair (see Engine: Precautions for the repair). WARNING Applying pressure to the engine oil sump

© 2016-2025 Copyright Renault Clio Owners Club