Renault Clio: Passenger compartment temperature sensor: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION


- Unclip the lower casing (1).
II - OPERATION FOR REMOVAL OF PART
CONCERNED

- Disconnect the passenger compartment temperature sensor connector (2).
- Remove:
- the passenger compartment temperature sensor
bolts located inside the lower cover,
- the passenger compartment temperature sensor.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED

- Refit:
- the passenger compartment temperature sensor,
- the passenger compartment temperature sensor
bolts located inside the lower cover.
- Connect the passenger compartment temperature sensor connector (3).
II - FINAL OPERATION.
- Clip on:
- the lower cowling
- the upper cover.
Exterior air temperature sensor: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove:
- the door mirror glass (see Door mirror glass: Removal - Refitting),
- the door mirror casing (see Door mirror casing: Removal -
Refitting).
II - OPERATION FOR REMOVAL OF PART
CONCERNED

- Unclip the exterior temperature sensor using a flat-blade
screwdriver.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Replace the exterior temperature sensor (see Technical
Note 6015A, Electrical wiring repair, 88A,
Wiring).
- Clip on the exterior temperature sensor.
II - FINAL OPERATION.
- Refit:
- the door mirror glass (see Door mirror glass: Removal - Refitting),
- the door mirror casing (see Door mirror casing: Removal -
Refitting).
Solar radiation sensor: Removal - Refitting
CLIMATE CONTROL

REMOVAL
I - REMOVAL PREPARATION OPERATION

- Unclip the display mounting using tool (Car. 1597).
II - OPERATION FOR REMOVAL OF PART
CONCERNED

- Remove the solar radiation sensor (1) from underneath
the dashboard.
- Disconnect the solar radiation sensor.
- Remove the solar radiation sensor.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED

- Connect the solar radiation sensor.
- Refit the solar radiation sensor (2).
II - FINAL OPERATION.
- Clip on the display mounting.
READ NEXT:
AIR CONDITIONING or CLIMATE CONTROL
I - SAFETY
IMPORTANT
The following must be worn when handling refrigerant:
gloves,
protective goggles (with side shields if possible).
In the event of refrigera
AIR CONDITIONING or CLIMATE CONTROL
Equipment required
Dual-sensor temperature measuring device
Note:
When performing RENAULT maintenance, check
the air conditioning system at the end of the vehicle's
SEE MORE:
D4F, and 740 - D4F, and 784 or 786
Spark plug electrode gap
REMOVAL
I - REMOVAL PREPARATION OPERATION
D4F, and 784
Remove the turbocharger air outlet pipe bolt (2) from
the inlet distributor.
Remove the turbocharger air outlet pipe clip (3) from
the turbocharger.
Note:
If the clip (4) is re
D4F, and 740 or 742 or 784
REMOVAL
I - REMOVAL PREPARATION OPERATION
Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 392, 02A, Lifting equipment).
Disconnect the battery (see ) (MR 392, 80A, Battery).
D4F, and 740 or 742
Remove the air filter unit (see 12A, Fuel
© 2016-2025 Copyright Renault Clio Owners Club
