Renault Clio: High pressure pipe: Check

K9K

Renault Clio. High pressure pipe: Check

WARNING

After any operation, check that there are no diesel fuel leaks

Renault Clio. High pressure pipe: Check

Renault Clio. High pressure pipe: Check

Note: The Diagnostic tool can be used for testing the high pressure circuit with the engine running.

This command can be used to run fault finding on a leak due to an incorrectly fitted or tightened union. This command only works if the engine coolant temperature is above 60

READ NEXT:

 Accelerometer: Removal - Refitting

K9K, and 750 or 752 or 760 or 762 or 766 or 768 Note: Vehicles equipped with the K9K*768 engine may or may not be equipped with an intercooler. REMOVAL I - REMOVAL PREPARATION OPERATION Remove the

 Crankshaft position sensor: Removal - Refitting

K9K, and 764 or 766 or 768 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Disconnect the battery (see Battery: Removal - Refi

 Preheating

SEE MORE:

 Navigation computer: Removal - Refitting

NAVIGATION AID 1 LEVEL REMOVAL I - REMOVAL PREPARATION OPERATION If the "computer - navigation screen" is being replaced, carry out the necessary operations using the Diagnostic tool (see Fault finding - Replacement of components) (86C, Navigation). Switch off the ignition. WARNING To preven

 Automatic gearbox connector: Removal - Refitting

DP0 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Shift the selector lever to Neutral. Disconnect the battery (see ) (MR 392, 80A, Battery). Remove: the front left-hand wheel (see Wheel:

© 2016-2025 Copyright Renault Clio Owners Club