Renault Clio: Rear panel lining: Removal - Refitting
C85 or S85

REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove the complete rear bench seat.

- Remove:
- the front seat belt support bolt (1).
- the front seat belt support.

- Unclip:
- the rear section of the front door sill lining (3),
- the rear wing panel trim at (4).
II - OPERATION FOR REMOVAL OF PART
CONCERNED

- Unclip the rear wing panel trim at (7), (8) and (9).
REFITTING
I - REFITTING PREPARATION OPERATION
- Always replace the front seat belt support bolt.
II - REFITTING OPERATION FOR PART
CONCERNED
- Clip on the rear wing panel trim.
C85

- Refit:
- the speaker,
- the bolts (10).

- Clip on the speaker grille.
III - FINAL OPERATION.
- Clip on the front door sill lining.
- Refit the front seat belt support.
- Torque tighten the front seat belt support bolt (21
Nm).
READ NEXT:
REMOVAL
I - REMOVAL PREPARATION OPERATION
C85
Remove the rear wing panel trim (see 71A, Body internal
trim, Rear panel lining: Removal - Refitting, 71A-32).
B85
Unclip the rear inner sill upper
REMOVAL
I - REMOVAL PREPARATION OPERATION
B85 or C85 or S85
Remove the luggage compartment carpet.
K85
Remove the luggage compartment raised floor (1).
Remove the luggage compartment carpe
S85
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove:
the rear parcel shelf,
the centre rear parcel shelf (1).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
Unclip the clips (2).
Remove
SEE MORE:
Permissible nose weight, maximum
permissible towing weight,
braked and unbraked: refer to
the information on “Weights” in
Section 6.
For fitting and conditions of use,
refer to the equipment’s fitting instructions.
Please keep these instructions with
the rest
Before towing, unlock the steering
column: with the clutch depressed,
engage first gear (lever in position N
or R for vehicles with automatic gearboxes),
insert the RENAULT card in the
card reader, then press the engine start
button for two seconds.
Reposition the lever to neutral (position
© 2016-2025 Copyright Renault Clio Owners Club
