Renault Clio: 3rd brake light: Removal - Refitting
B85 or C85 or S85
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED

- Remove the blanking covers (1).

- Insert a screwdriver in the openings to move the clips (2).

- Apply pressure to the clips (2) to unclip the high level
brake light.
- Partially remove the raised brake light using a flat-blade
screwdriver while protecting the tailgate area
with masking tape.
- Disconnect the connector (3).
- Unclip the window washer jet by moving the clips (4).
- If replacing the high level brake light, remove the
bulb (see 81A, Rear lighting, High level brake
light bulb: Removal - Refitting, 81A-12).
REFITTING
REFITTING OPERATION FOR PART CONCERNED
- If replacing the high level brake light, refit the bulb
(see 81A, Rear lighting, High level brake light
bulb: Removal - Refitting, 81A-12).
- Connect the connector.
- Clip:
- the window washer jet,
- the high level brake light.
- Refit the blanking covers.
K85
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove the tailgate spoiler (see Tailgate spoiler:
Removal - Refitting) (56A, Exterior equipment).
II - OPERATION FOR REMOVAL OF PART
CONCERNED

- Remove:
- the bolts (1) of the high-level brake light on the tailgate,
- The high-level brake light.
- If replacing the high-level brake light, remove the
bulb (see 81A, Rear lighting, High level brake
light bulb: Removal - Refitting, 81A-12).
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- If replacing the high-level brake light, refit the bulb
(see 81A, Rear lighting, High level brake light
bulb: Removal - Refitting, 81A-12).
- Refit the high-level brake light on the tailgate.
II - FINAL OPERATION.
- Refit the tailgate spoiler (see Tailgate spoiler: Removal
- Refitting) (56A, Exterior equipment).
READ NEXT:
K85
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove:
the tailgate spoiler (see Tailgate spoiler: Removal - Refitting),
the high level brake light (see 81A, Rear lighting,
3rd brake light: Rem
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
K85, and DOCUMENTATION PHASE 1
Move the rear fog light using the tool (Car. 1363) as a lever at (1).
B85 or C85 or S85, and DOCUMENTATION
PHASE 2
Interior lighting: Function
I - GENERAL INFORMATION
Vehicles may be fitted with the following units for lighting
the interior of the passenger compartment, depending
on the level of equipment:
a cou
SEE MORE:
REMOVAL
I - REMOVAL PREPARATION OPERATION
Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 392, 02A, Lifting equipment).
Disconnect the battery (see Battery: Removal - Refitting)
(MR 392, 80A, Battery).
Perform the following operations:
drain the engine oil (see
EQUIPMENT LEVEL E3 LEISURE or EQUIPMENT LEVEL EA1 or EQUIPMENT LEVEL EA2
or EQUIPMENT
LEVEL EA3 or EQUIPMENT LEVEL EA4 or EQUIPMENT LEVEL EA5 or EQUIPMENT LEVEL EAG
The removal - refitting procedure is the same for alloy
and steel wheels.
REMOVAL
I - REMOVAL PREPARATION OPERATION
Position the ve
© 2016-2025 Copyright Renault Clio Owners Club
