Renault Clio: Rear wing light: Removal - Refitting
B85 or C85 or S85
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
- Open the luggage compartment.

- Remove the bolts from the rear wing light (1).
- Remove the rear wing light.
- Disconnect the connector from the rear light on the
wing.
- Remove the rear light.
- If replacing the rear light, remove the bulbs (see
81A, Rear lighting, Rear light bulb: Removal - Refitting, 81A-7).
REFITTING
REFITTING OPERATION FOR PART CONCERNED
- If replacing the rear light, refit the bulbs (see 81A,
Rear lighting, Rear light bulb: Removal - Refitting, 81A-7).
- Connect the connector for the rear light on the wing.

- Position the rear light on the wing using the centring devices (2).
- Refit the bolts for the rear light on the wing.
- Close the luggage compartment.
K85
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
- Open the luggage compartment.

- Remove the bolts from the rear wing light (1).
- Remove the rear wing light.
- Disconnect the connector from the rear light on the
wing.
- Remove the rear light.
- If replacing the rear light, remove the bulbs (see
81A, Rear lighting, Rear light bulb: Removal - Refitting, 81A-7).
REFITTING
REFITTING OPERATION FOR PART CONCERNED
- If replacing the rear light, refit the bulbs (see 81A,
Rear lighting, Rear light bulb: Removal - Refitting, 81A-7).
- Connect the connector for the rear light on the wing.

- Position the rear light on the wing using the centring devices (2).
- Refit the bolts for the rear light on the wing.
- Close the luggage compartment.
READ NEXT:
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove the rear light on the wing (see 81A, Rear
lighting, Rear wing light: Removal - Refitting, 81A-5).
B85 or C85 or S85, and DOCUMENTATION
PHASE 1
U
B85 or C85 or S85
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
Remove the blanking covers (1).
Insert a screwdriver in the openings to move the clips (2).
Apply pressure to the clips (2)
K85
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove:
the tailgate spoiler (see Tailgate spoiler: Removal - Refitting),
the high level brake light (see 81A, Rear lighting,
3rd brake light: Rem
SEE MORE:
M4R
The engine and gearbox assembly must be removed
to remove/refit the camshaft dephaser (see
10A, Engine and cylinder block assembly, Engine
- gearbox assembly: Removal - Refitting, 10A-112).
For the camshaft dephaser removal-refitting procedure
(see ) (Technical Note 6020A, 10A, Engine and
Force limiter
Above a certain severity of impact, this
mechanism is used to limit the force of
the belt against the body so that it is at
an acceptable level.
Have the entire restraint
system checked following
an accident.
No operation whatsoever
is permitted on
© 2016-2025 Copyright Renault Clio Owners Club
