Renault Clio: Preheating

READ NEXT:

 Pre-postheating unit: Removal - Refitting

K9K REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the battery (see Battery: Removal - Refitting), the battery tray (see Battery tray: Removal - Refitting) (MR 392, 80A, Battery). II

 Heater plugs: Removal - Refitting

K9K, and 764 or 772 REMOVAL I - REMOVAL PREPARATION OPERATION Remove the air filter box inlet air pipe (1). Remove the turbocharger outlet air pipe retaining pins (2). Remove: the turbochar

 Antipollution

SEE MORE:

 Hydraulic unit - underbody union brake pipe: Removal - Refitting

LEFT-HAND DRIVE REMOVAL I - REMOVAL PREPARATION OPERATION Put the vehicle on a two-post lift (see Vehicle: Towing and lifting). Drain the coolant circuit using refrigerant charging station. Fit a pedal press on the brake pedal. Disconnect the battery (see Battery: Removal - Refitting). K4J o

 Passenger compartment fan assembly control unit: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Disconnect the battery (see Battery: Removal - Refitting) (80A, Battery). Partially remove the seal (1). Remove the side panel (2). Remove the bolt (3) from the base of the dashboard. Unclip the trim piece (4) from the driver's side dashboard

© 2016-2025 Copyright Renault Clio Owners Club