Renault Clio: Heater plugs: Removal - Refitting

K9K, and 764 or 772

Renault Clio. Heater plugs: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

Renault Clio. Heater plugs: Removal - Refitting

Renault Clio. Heater plugs: Removal - Refitting

Renault Clio. Heater plugs: Removal - Refitting

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Heater plugs: Removal - Refitting

Note: Use a hose to unscrew the plugs completely.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

WARNING

Ensure that no foreign bodies enter the cylinder during this operation.

II - FINAL OPERATION

K9K, and 750 or 752 or 766 or 768

Renault Clio. Heater plugs: Removal - Refitting

REMOVAL

REMOVAL PREPARATION OPERATION

Renault Clio. Heater plugs: Removal - Refitting

K9K, and 750 or 768

Renault Clio. Heater plugs: Removal - Refitting

Renault Clio. Heater plugs: Removal - Refitting

K9K, and 766

Renault Clio. Heater plugs: Removal - Refitting

Renault Clio. Heater plugs: Removal - Refitting

OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Heater plugs: Removal - Refitting

Note: Use a hose to unscrew the plugs completely.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

WARNING

Ensure that no foreign bodies enter the cylinder during this operation.

II - FINAL OPERATION.

K9K, and 750 or 768

K9K, and 766

 

READ NEXT:

 Antipollution

 Exhaust gas recirculation: List and location of components

K9K K9K, and 764 or 766 or 768 or 772 First fitting of the exhaust gas cooler recirculation assembly (1) Exhaust gas recirculation solenoid valve (2) Exhaust gas cooler (3) Exhaust gas inlet pipe (4)

 Exhaust gas recirculation solenoid valve: Removal - Refitting

K9K, and 764 or 766 or 768 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect the bat

SEE MORE:

 Recirculation motor: Removal - Refitting

LEFT-HAND DRIVE, and CLIMATE CONTROL REMOVAL I - REMOVAL PREPARATION OPERATION Lock the airbag computer using the Diagnostic tool (see Fault finding - Replacement of components) ( MR 394, 88C, Airbag and pretensioners). Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, B

 Ignition: Specifications

D4F or F4R or K4J or K4M or M4R Coils: Removal - Refitting D4F, and 740 or 742 or 764 REMOVAL I - REMOVAL PREPARATION OPERATION Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery). Remove the air filter unit (see 12A, Fuel mixture, Air filter unit: Removal - Refit

© 2016-2023 Copyright www.rclio.com