Renault Clio: Levels

READ NEXT:

 Engine coolant

With the engine switched off and on level ground, the level when cold must be between the MINI and MAXI marks on reservoir 1. Top this level up when cold before it reaches the MINI mark.

 Brake fluid

The level should be read with the engine switched off and on level ground. This should be checked frequently, and immediately if you notice even the slightest loss in braking efficiency.

 Windscreen washer reservoir

Topping up With the engine switched off, open the cap 3. Fill until you can see the fluid, then replace the cap. Liquid Screen wash product (product with antifreeze in winter).

SEE MORE:

 Rear quarter panel window: Removal - Refitting

C85 or K85 or S85 REMOVAL I - REMOVAL PREPARATION OPERATION C85 or S85 Remove: the rear wing panel trim (see Rear panel lining: Removal - Refitting) (71A, Body internal trim), the rear roof drip moulding trim (see Side roof rail rear trim: Removal - Refitting) (71A, Body internal trim),

 Wheel trims - wheel

Remove the wheel trim using hubcap tool 1 (located in the tool kit) by engaging the hook in the opening near valve 2. To refit it, align it with valve 2. Push the retaining hooks in fully, starting with side A near the valve, followed by B and C, finishing at D opposite the valve.

© 2016-2025 Copyright Renault Clio Owners Club