Renault Clio: Door mirror: Removal - Refitting
Renault Clio III (2005-2013) Service Manual / Mechanisms And Accessories / Exterior Equipment / Door mirror: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Unclip the trim (1).
II - OPERATION FOR REMOVAL OF PART CONCERNED
- Remove:
- the sealing foam (2),
- the bolts (3)
- the door mirror.
- Disconnect the supply connectors (depending on equipment level).
SCHOOL VEHICLE
- Unclip the casing (4).
- Remove the bolts (5).
- Remove the door mirror.
REFITTING
I - REFITTING OPERATION FOR PART CONCERNED
- Connect the supply connector (depending on equipment level).
- Refit:
- the door mirror,
- the bolts (6),
- the sealing foam.
SCHOOL VEHICLE
- Position the door mirror.
- Refit the door mirror bolts.
- Clip the casing in place.
II - FINAL OPERATION
- Clip the trim piece in place (7).
Door mirror casing: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove the door mirror glass (see 56A, Exterior equipment, Door mirror glass: Removal - Refitting, 56A-16).
II - REMOVAL OPERATION FOR PART CONCERNED
- Unclip the clips (1).
- Fold in the door mirror.
- Unclip the door mirror casing.
REFITTING
I - REFITTING OPERATION FOR PART CONCERNED
- Reclip the door mirror casing in position.
II - FINAL OPERATION
- Refit the door mirror glass (see 56A, Exterior equipment, Door mirror glass: Removal - Refitting, 56A-16).
SCHOOL VEHICLE
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove the door mirror glass (see 56A, Exterior equipment, Door mirror glass: Removal - Refitting, 56A-16).
- Unclip the casing (1).
- Remove the bolts (2).
- Remove the door mirror.
II - OPERATION FOR REMOVAL OF PART CONCERNED
- Unclip clips (3).
- Fold in the door mirror.
- Unclip the door mirror casing.
REFITTING
I - REFITTING OPERATION FOR PART CONCERNED
- Clip on the door mirror casing.
II - FINAL OPERATION
- Offer up the door mirror.
- Refit the bolts (4).
- Clip on the casing
- Refit the door mirror glass (see 56A, Exterior equipment, Door mirror glass: Removal - Refitting, 56A-16).
Door mirror glass: Removal - Refitting
REMOVAL
OPERATION FOR REMOVAL OF PART CONCERNED
- Unclip the door mirror glass using the (Car. 1363).
- Disconnect the supply connectors (depending on the equipment level).
REFITTING
REFITTING PREPARATION OPERATION
- Connect the supply connectors (depending on the equipment level).
- Clip the door mirror glass in position.
READ NEXT:
Side decorative strips: Removal - Refitting
Note:
Once removed, the side decorative strips cannot
be refitted and must be replaced each time.
REMOVAL
I - REMOVAL PREPARATION OPERATION
1 - Front side door
Remove:
the front side door trim (se
Sill panel extension: Removal - Refitting
EQUIPMENT LEVEL EAC or EQUIPMENT LEVEL SPORT
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
Remove the bolts (1).
Detach the decorative strip (2).
Note:
Replace the decorative strip (2) ever
SEE MORE:
M4R, and DP0
REMOVAL
I - REMOVAL PREPARATION OPERATION
Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 392, 02A, Lifting equipment).
IMPORTANT
During this operation, secure the vehicle to the
lift with a strap to prevent it from becoming unbalanced.
Remove the engine cover.
Hydraulic unit - front left-hand calliper brake pipe: Removal - Refitting
LEFT-HAND DRIVE
REMOVAL
I - REMOVAL PREPARATION OPERATION
Put the vehicle on a two-post lift (see Vehicle: Towing and lifting).
Drain the coolant circuit using refrigerant charging
station.
Fit a pedal press on the brake pedal.
Disconnect the battery (see Battery: Removal - Refitting).
Remov
© 2016-2022 Copyright www.rclio.com