{MAINCONT}

Renault Clio: Clutch

READ NEXT:

 Clutch: Precautions for the repair

Before removing the clutch, check: The direction of fitting for the clutch plate. Before refitting the clutch, check: The flywheel friction track (no scratches or blue stains), The crankshaft

 Pressure plate - Disc: Removal - Refitting

D4F or K4J or K4M or K9K, and 750 or 752 or 760 or 762 or 766 or 768, and JH3 or JR5 REMOVAL Remove the gearbox (see 21A, Manual gearbox, Manual gearbox: Removal - Refitting, 21A- 12). Lock

 Clutch thrust bearing: Removal - Refitting

The thrust bearing is connected to the clutch slave cylinder. REMOVAL I - REMOVAL PREPARATION OPERATION Drain the brake reservoir using a syringe to remove the clutch thrust bearing and control.

SEE MORE:

  Fitting a radio

Radio location 1 Unclip the blanking cover. The aerial, + and – supply and speaker wire connections are located behind it. Door speakers 2 To install any equipment, please consult an authorised dealer. In all cases, it is very important to follow the manufacturer’s

  Accessories

Electrical and electronic accessoriesBefore installing this type of accessory (particularly for transmitters/receivers: frequency bandwidth, power level, position of the aerial, etc.), make sure it is compatible with your vehicle. You can get advice from an authorised dealer.

{VIDEOCONT}
© 2016-2026 Copyright Renault Clio Owners Club - 0.003