Renault Clio manuals
{MAINCONT}

Renault Clio: Preheating

Renault Clio III (2005-2013) Service Manual / Engine And Peripherals / Preheating

READ NEXT:

 Pre-postheating unit: Removal - Refitting

K9K REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the battery (see Battery: Removal - Refitting), the battery tray (see Battery tray: Removal - Refitting) (MR 392, 80A, Battery). II

 Heater plugs: Removal - Refitting

K9K, and 764 or 772 REMOVAL I - REMOVAL PREPARATION OPERATION Remove the air filter box inlet air pipe (1). Remove the turbocharger outlet air pipe retaining pins (2). Remove: the turbochar

 Antipollution

SEE MORE:

  Diesel injector: Configurations

K9K, and 750 or 752 or 766 or 768 To configure the injectors, (see MR 394 Fault finding, Diesel Injection, Configuration and programming). Diesel injector: Removal - Refitting K9K, and 764 or 772 IMPORTANT To avoid all risk of damage to the systems, apply the safety and cleanliness instructions

  High pressure pipe: Check

K9K WARNING After any operation, check that there are no diesel fuel leaks Reprime the diesel circuit using the priming pump. Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery). Remove the engine protector. Disconnect the inlet air pressure sensor (1) Remove

{VIDEOCONT}
© 2016-2026 Copyright Renault Clio Owners Club - 0.0038