Renault Clio manuals

Renault Clio: Cylinder head: Removal - Refitting

Renault Clio III (2005-2013) Service Manual / Engine And Peripherals / Top And Front Of Engine / Cylinder head: Removal - Refitting

READ NEXT:

 D4F, and 740 or 742 or 764

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment). Disconnect the battery (see Battery: Removal - Refitt

 K4J or K4M

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment). Remove: the engine cover, the engine undertray bo

 K9K, and 764 or 772

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment). Remove: the engine cover, the engine undertray,

SEE MORE:

 Luggage compartment cover: estate version

To remove the flexible section of the luggage compartment cover 1 Pull handle 2 gently to release the pins from their mounting points located on each side of the luggage boot. Guide the luggage cover onto the roller. Removing the luggage compartment cover Using the handle 2, push the

 Heater matrix: Removal - Refitting

LEFT-HAND DRIVE REMOVAL I - REMOVAL PREPARATION OPERATION Place hose clamps (Ms. 583) on the heater matrix hoses at (1). Remove: the heater matrix hose clips, the heater matrix hoses, the centre console (see Centre console: Removal - Refitting) (MR 393, 57A, Interior equipment).

© 2016-2025 Copyright Renault Clio Owners Club