Renault Clio manuals

Renault Clio: Petrol Injection

Renault Clio III (2005-2013) Service Manual / Engine And Peripherals / Petrol Injection

READ NEXT:

 Petrol injection: List and location of components

D4F, and 740 or 742 or 764 Petrol vapour rebreathing solenoid valve Air inlet pressure sensor Motorised throttle valve Injection computer (5) Fuel injection computer (6) Motorised throttle v

 Oxygen sensors: Removal - Refitting

D4F, and 740 WARNING Do not use any product designed to improve electrical contact in the injection computer connectors and oxygen sensors and on the oxygen sensor body. Failure to respect this advic

 Crankshaft position sensor: Removal - Refitting

D4F, and 740 or 742 or 764 REMOVAL I - REMOVAL PREPARATION OPERATION Disconnect the battery (see Battery: Removal - Refitting). Remove the air filter unit (see 12A, Fuel mixture, Air filter unit:

SEE MORE:

 Front side door electric window mechanism: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Remove the front side door trim (see Front side door trim: Removal - Refitting) (72A, Side opening elements trim). Open the access flaps (1) and (2) of the window winder mechanism following the marking on the door sealing film (see Door sealing fi

 Rear drum bearing: Removal - Refitting

Using a dial gauge connected to the drum, check that the end float is greater than 0.03 mm. REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Remove: the rear wheels (see 35A, Wheels and tyres, Wheel: Removal - Refitting, 35

© 2016-2025 Copyright Renault Clio Owners Club