Renault Clio: Exterior Equipment

READ NEXT:

 Scuttle panel grille: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Remove the wiper arms (see Windscreen wiper arm: Removal - Refitting) (MR 392, Mechanical systems, 85A, Washing - Wiping). Remove the seal (1). II -

 Tailgate spoiler: Removal - Refitting

K85 REMOVAL OPERATION FOR REMOVAL OF PART CONCERNED Remove: the blanking covers (1), the nuts (2). Unclip the tailgate spoiler at (3). Disconnect: the high level brake light connecto

 Scoop under the scuttle panel grille: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Remove the scuttle panel grille (see 56A, Exterior equipment, Scuttle panel grille: Removal - Refitting, 56A-1). Remove the trim under the scuttle pane

SEE MORE:

 Solenoid valves: Removal - Refitting

K9K, and JA5 REMOVAL I - REMOVAL PREPARATION OPERATION Note: Before removing the solenoid valves, always mark their respective connectors in order not to mix them up. IMPORTANT Before any operation on the sequential system, discharge the accumulator using the Diagnostic tool. To discharge the acc

 K9K, and 764 or 772

IMPORTANT Wear protective gloves during the operation. WARNING Never rotate the engine anti-clockwise (timing end). WARNING Do not run the engine without the accessories belt, to avoid breaking the crankshaft accessories pulley. PARTS AND CONSUMABLES FOR THE REPAIR WORK Parts always to be replace

© 2016-2025 Copyright Renault Clio Owners Club