{MAINCONT}

Renault Clio: Side Opening Element Mechanisms

READ NEXT:

 Front side door lock: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the door trim (see Front side door trim: Removal - Refitting) (MR 393,72A, Side door trim), the door lock barrel (see 51A, Side opening eleme

 Front side door electric window mechanism: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Remove the front side door trim (see Front side door trim: Removal - Refitting) (72A, Side opening elements trim). Open the access flaps (1) and (2)

 Rear side door lock: Removal - Refitting

B85 or K85 REMOVAL I - REMOVAL PREPARATION OPERATION Remove the door trim (see Rear side door trim: Removal - Refitting) (MR 393, 72A, Side opening element trim). Unclip the access blanking cove

SEE MORE:

  Engine cooling system: Operating diagram

D4F D4F, and 740 or 742 or 764 Engine Cooling radiator heater matrix Expansion bottle Water pump Thermostat Bleed screws 5 mm restriction 10 mm restriction Note: The rating of the expansion bottle degassing valve is 1.4 bar. D4F, and 784 Engine Cooling radiator Heater matrix Expans

  Cooling system: Draining - Refilling

IMPORTANT The circuits are designed to be pressurised, so be careful at high temperatures (risk of serious burns). Do not remove the cap from the expansion bottle while the engine is hot. Take care when carrying out a repair under the bonnet, as the radiator fan(s) may start to operate without wa

{VIDEOCONT}
© 2016-2026 Copyright Renault Clio Owners Club - 0.004