Renault Clio: Front side door electric window mechanism: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove the front side door trim (see Front side
door trim: Removal - Refitting) (72A, Side opening
elements trim).
- Open the access flaps (1) and (2) of the window
winder mechanism following the marking on the
door sealing film (see Door sealing film: Removal
- Refitting) (65A, Opening element sealing).
- Remove the front side door sliding window (see
54A, Windows, Front side door sliding window:
Removal - Refitting, 54A-4) or keep it in the
raised position with masking tape.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
- Make cuts in the sealing film to access the window winder mechanism
bolts (3).
C85
- Unclip the window winder mechanism cable (5).
- Remove bolts (3) and (4).
- Disconnect the electric window mechanism supply
connector.
- Remove the window winder mechanism.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
Note:
Check for the presence of washers on the bolts
(6), the bolts (7) and the bolts (8) when refitting
the window winder mechanism.
The presence of washers ensures correct tightening.
- Refit the window winder mechanism in the door box
section.
- Connect the window winder mechanism supply connector.
- Refit the front side door sliding window glass (see
54A, Windows, Front side door sliding window:
Removal - Refitting, 54A-4).
Note:
When refitting the window winder mechanism,
respect the tightening order.
The tightening order ensures the correct alignment
of the window winder mechanism and that
the window is correctly positioned with the clip.
- Torque tighten the window winder mechanism bolts (6.5 N.m) following the
tightening order: bolts (6), bolts (7) and bolts (8).
C85
- Clip on the window winder mechanism cable (5).
- Carry out a function test.
II - FINAL OPERATION
- Close the access flaps and the cuts in the door sealing
film (see Door sealing film: Removal - Refitting)
(65A, Opening element sealing).
- Refit the front side door trim (see Front side door
trim: Removal - Refitting) (72A, Side opening elements
trim).
- Initialise the window winder motor (depending on
equipment level) (see Electric windows: Initialisation)
(87D, Electric windows - Sunroof).
Front side door manual window winder mechanism: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove the door trim (see Front side door trim:
Removal - Refitting) (72A, Side opening elements
trim).
- Open the access flaps (1) and (2) of the window
winder mechanism following the marking on the
sealing film (see Door sealing film: Removal - Refitting)
(65A, Opening element sealing).
- Remove the sliding window (see 54A, Windows,
Front side door sliding window: Removal - Refitting, 54A-4) or secure it in the raised position
using masking tape.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
- Make cuts in the sealing film to access the window winder mechanism bolt
(3).
C85
- Unclip the window winder mechanism cable (4).
- Remove:
- the bolts (3),
- the window winder mechanism.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
Note:
Check for the presence of washers on the bolts
(1), the bolts (2) and the bolts (3) when refitting
the window winder mechanism.
The presence of washers ensures correct tightening.
- Refit:
- the window winder mechanism in the door box section,
- the sliding window (see 54A, Windows, Front
side door sliding window: Removal - Refitting, 54A-4).
Note:
When refitting the window winder mechanism,
respect the tightening order.
The tightening order ensures the correct alignment
of the window winder mechanism and that
the window is correctly positioned with the clip.
- Torque tighten the window winder mechanism bolts (6.5 N.m) following the
tightening order: bolts (1), bolts (2) and bolts (3).
C85
- Clip on the window winder mechanism cable.
- Carry out a function test.
II - FINAL OPERATION
- Close the access flaps and the cuts in the sealing
film (see Door sealing film: Removal - Refitting)
(65A, Opening element sealing).
- Refit the door trim (see Front side door trim: Removal
- Refitting) (72A, Side opening elements
trim).
READ NEXT:
B85 or K85
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove the door trim (see Rear side door trim:
Removal - Refitting) (MR 393, 72A, Side opening
element trim).
Unclip the access blanking cove
Bonnet release control: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove:
the wheel arch liners (see 55A, Exterior protection,
Front wheel arch liner: Removal - Refitting, 5
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove the front bumper (see 55A, Exterior protection,
Front bumper: Removal - Refitting, 55A-1).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
Remove
SEE MORE:
M4R, and TL4
REMOVAL
I - REMOVAL PREPARATION OPERATION
Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 392, 02A, Lifting equipment).
Disconnect the battery (see Battery: Removal - Refitting)
(MR 392, 80A, Battery).
Remove the front right-hand driveshaft (see 29A,
IMPORTANT
To avoid all risk of damage to the systems, apply
the safety and cleanliness instructions and operation
recommendations before carrying out any
repair (see 88C, Air bag and Pretensioners, Airbag
and pretensioners: Precautions for the
repair, 88C-6).
IMPORTANT
To eliminate the risk of any
© 2016-2024 Copyright Renault Clio Owners Club