Renault Clio manuals
{MAINCONT}

Renault Clio: Petrol Injection

Renault Clio III (2005-2013) Service Manual / Engine And Peripherals / Petrol Injection

READ NEXT:

 Petrol injection: List and location of components

D4F, and 740 or 742 or 764 Petrol vapour rebreathing solenoid valve Air inlet pressure sensor Motorised throttle valve Injection computer (5) Fuel injection computer (6) Motorised throttle v

 Oxygen sensors: Removal - Refitting

D4F, and 740 WARNING Do not use any product designed to improve electrical contact in the injection computer connectors and oxygen sensors and on the oxygen sensor body. Failure to respect this advic

 Crankshaft position sensor: Removal - Refitting

D4F, and 740 or 742 or 764 REMOVAL I - REMOVAL PREPARATION OPERATION Disconnect the battery (see Battery: Removal - Refitting). Remove the air filter unit (see 12A, Fuel mixture, Air filter unit:

SEE MORE:

  Injector holder shim: Removal - Refitting

K4J or K4M REMOVAL I - REMOVAL PREPARATION OPERATION Disconnect the battery (see Battery: Removal - Refitting) (80A, Battery). K4M, and 862 Remove: the air resonator (1). the air filter unit air inlet pipe (2), the dipstick, the dipstick guide bolts (3). Move aside the dipstick

  Exhaust manifold: Removal - Refitting

D4F, and 740 or 742 or 764 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect the battery (see Battery: Removal - Refitting) (MR392, 80A, Battery). Remove: the air filter box (see 1

{VIDEOCONT}
© 2016-2026 Copyright Renault Clio Owners Club - 0.0042