{MAINCONT}

Renault Clio: Turbocharging

READ NEXT:

 Turbocharging: Precautions for the repair

D4F or K9K I - TURBOCHARGER: GENERAL INSTRUCTIONS For the turbocharging pressure regulator check (see Fault finding - Tests) (Technical Note 3419A, 12B, Turbocharging). WARNING The turbocharger press

 Turbocharger: Removal - Refitting

K9K, and 750 or 752 or 764 or 766 or 768 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Remo

 Turbocharger oil pipe: Removal - Refitting

D4F, and 784 or 786 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect the battery (s

SEE MORE:

  Front half unit: Description

Left-hand side Right-hand side To replace this part, order the heater bulkhead reinforcement (A) and the side member expanding insert (B). There is only one way of replacing this part: complete replacement. IMPORTANT The straightening bench must be used. I - COMPOSITION OF THE SPARE PART Left

  Centre Lower Structure

Centre floor front side cross member: General description IMPORTANT Use a repair bench to ensure the positioning of the points and the geometry of the axle assemblies. Note: The information contained in the following describes the general repair procedure for all vehicles having the same design for

{VIDEOCONT}
© 2016-2026 Copyright Renault Clio Owners Club - 0.0038