Renault Clio manuals
{MAINCONT}

Renault Clio: General Information

Renault Clio III (2005-2013) Service Manual / Panelwork / General Information

READ NEXT:

 Specialised bodywork tools: Use

USING THE DASHBOARD CROSS MEMBER REMOVAL TOOL Car. 1765 Use this tool as indicated in the dashboard removal procedure. Fit the tool Car. 1765 as far as the stop (10). Screw the rod (11) onto

 Structural bodywork documentation: Use

B85 or C85 I - CLASSIFYING INFORMATION This information is classified in two complementary documents: 1 - Vehicle structure bodywork repair procedures (MR of the vehicle concerned) This document compr

 Vehicle on repair bench: Description

I - MAIN REFERENCE POINTS BEFORE TRIM-SETTING 1 - Front sub-frame in place The jig crowns the front sub-frame rear mounting bolt (A). Use this situation for a rear impact or a light frontal impact w

SEE MORE:

  B-pillar trim: Removal - Refitting

B85 REMOVAL I - REMOVAL PREPARATION OPERATION Move the seats fully forward. Partially remove the frame seals (1). Partially unclip the front and rear door sill trims. II - REMOVAL OF PART CONCERNED Unclip the B-pillar lower trim at (2). Remove the B-pillar lower trim. Unclip bolt c

  Rear inner sill upper trim: Removal - Refitting

B85 REMOVAL I - REMOVAL PREPARATION OPERATION Remove the complete rear bench seat. Partially remove seal (1). II - OPERATION FOR REMOVAL OF PART CONCERNED Remove the trim at (2) and at (3). REFITTING I - REFITTING OPERATION FOR PART CONCERNED Refit the rear door sill upper trim. II - F

{VIDEOCONT}
© 2016-2026 Copyright Renault Clio Owners Club - 0.0043