Renault Clio: Front seat base frame: Removal - Refitting

WITHOUT SPORT SEATS, and DOCUMENTATION PHASE 2

Renault Clio. Front seat base frame: Removal - Refitting

IMPORTANT

Before beginning work on any component of the safety system, it is essential to lock the airbag computer using the Diagnostic tool (see Airbag and pretensioners: Precautions for the repair) (88C, Airbag and pretensioners). When this function is activated, all the trigger lines are inhibited and the airbag warning light on the instrument panel is continuously lit (with the ignition on).

IMPORTANT

Never handle the pyrotechnic systems (pretensioners or airbags) near to a source of heat or naked flame - they may be triggered.

IMPORTANT

In order not to weaken a seat frame or bench seat frame, all welding operations on the seat frames or bench seat frames are forbidden.

Note: Depending on the sales mode defined by the Parts Department, conversions can be carried out on the seat frames.

In this case, it is permitted to eliminate certain components (supports, wires, brackets, inserts, etc) depending on vehicle type.

REMOVAL

I - REMOVAL PREPARATION OPERATION

FRONT SEAT TYPE 02 or FRONT SEAT TYPE 03 or FRONT SEAT TYPE 05

 

B85

C85

FRONT SEAT TYPE 02 or FRONT SEAT TYPE 03 or FRONT SEAT TYPE 05

Renault Clio. Front seat base frame: Removal - Refitting

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Front seat base frame: Removal - Refitting

REFITTING

I - REFITTING PREPARATION OPERATION

II - REFITTING OPERATION FOR PART CONCERNED

III - FINAL OPERATION

FRONT SEAT TYPE 02 or FRONT SEAT TYPE 03 or FRONT SEAT TYPE 05

B85

C85

 

FRONT SEAT TYPE 02 or FRONT SEAT TYPE 03 or FRONT SEAT TYPE 05

 

SPORT FRONT SEATS

Renault Clio. Front seat base frame: Removal - Refitting

IMPORTANT

In order not to weaken a seat frame or bench seat frame, all welding operations on the seat frames or bench seat frames are forbidden.

Note: The Parts Department delivers the front seat base frame assembled with the front seat runners.

Note: Depending on the method of sale defined by the Parts Department, adaptations can be made to the seat frames.

In this case, it is permitted to eliminate certain components (supports, wires, brackets, inserts, etc.) depending on the vehicle type.

REMOVAL

I - REMOVAL PREPARATION OPERATION

Renault Clio. Front seat base frame: Removal - Refitting

Renault Clio. Front seat base frame: Removal - Refitting

II - REMOVAL OPERATION

Renault Clio. Front seat base frame: Removal - Refitting

Note: The bolts for the front " seatback - seat base " frame have a 12-sided recess in the head, (use a socket part number: SV.8LB).

REFITTING

I - REFITTING PREPARATION OPERATION

II - REFITTING OPERATION

III - FINAL OPERATION

READ NEXT:

 Front seatback frame: Removal - Refitting

WITHOUT SPORT SEATS, and DOCUMENTATION PHASE 2 IMPORTANT Before beginning work on any component of the safety system, it is essential to lock the airbag computer using the Diagnostic tool (see Airbag

 Front seat runner: Removal - Refitting

WITHOUT SPORT SEATS, and DOCUMENTATION PHASE 2 IMPORTANT Before beginning work on any component of the safety system, it is essential to lock the airbag computer using the Diagnostic tool (see Airbag

 Front seat height adjuster control: Removal - Refitting

FRONT SEAT TYPE 02 or FRONT SEAT TYPE 03 or FRONT SEAT TYPE 05, and WITHOUT SPORT SEATS, and DOCUMENTATION PHASE 1 or DOCUMENTATION PHASE 2 REMOVAL OPERATION FOR REMOVAL OF PART CONCERNED Unclip

SEE MORE:

 B-pillar trim: Removal - Refitting

B85 REMOVAL I - REMOVAL PREPARATION OPERATION Move the seats fully forward. Partially remove the frame seals (1). Partially unclip the front and rear door sill trims. II - REMOVAL OF PART CONCERNED Unclip the B-pillar lower trim at (2). Remove the B-pillar lower trim. Unclip bolt c

 High level brake light bulb: Removal - Refitting

K85 REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the tailgate spoiler (see Tailgate spoiler: Removal - Refitting), the high level brake light (see 81A, Rear lighting, 3rd brake light: Removal - Refitting, 81A- 10). II - OPERATION FOR REMOVAL OF PART CONCERNED Remove: the bulb

© 2016-2022 Copyright www.rclio.com