Renault Clio: Side Opening Element Mechanisms

READ NEXT:

 Front side door lock: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the door trim (see Front side door trim: Removal - Refitting) (MR 393,72A, Side door trim), the door lock barrel (see 51A, Side opening eleme

 Front side door electric window mechanism: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Remove the front side door trim (see Front side door trim: Removal - Refitting) (72A, Side opening elements trim). Open the access flaps (1) and (2)

 Rear side door lock: Removal - Refitting

B85 or K85 REMOVAL I - REMOVAL PREPARATION OPERATION Remove the door trim (see Rear side door trim: Removal - Refitting) (MR 393, 72A, Side opening element trim). Unclip the access blanking cove

SEE MORE:

 Hydraulic unit - front left-hand calliper brake pipe: Removal - Refitting

LEFT-HAND DRIVE REMOVAL I - REMOVAL PREPARATION OPERATION Put the vehicle on a two-post lift (see Vehicle: Towing and lifting). Drain the coolant circuit using refrigerant charging station. Fit a pedal press on the brake pedal. Disconnect the battery (see Battery: Removal - Refitting). Remov

 Front left-hand driveshaft gaiter, gearbox side: Removal - Refitting

DP0 or JH3 or JR5 or TL4 Tightening clip Tightening ring Cup Driveshaft yoke sleeve Deflector Propeller shaft RC gaiter Spider Lock ring Spring REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting eq

© 2016-2025 Copyright Renault Clio Owners Club