Renault Clio: Starting - Charging

READ NEXT:

 Charge circuit: Specifications

D4F or F4R or K4J or K4M or K9K or M4R ALTERNATOR SPECIFICATIONS Charge circuit: Function D4F or F4R or K4J or K4M or K9K or M4R OPERATION These vehicles are fitted with a built-in regulator and an i

 Alternator: Removal - Refitting

K4J, and STANDARD HEATING - K4M, and STANDARD HEATING REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Remove the air inlet

 Starter: Removal - Refitting

D4F, and 740 or 742 or 764 REMOVAL I - REMOVAL PREPARATION OPERATION Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery). Remove the air filter unit (see 12A, Fuel mi

SEE MORE:

 Air conditioning: information and advice on use

Advice on use In some situations, (air conditioning off, air recirculation activated, ventilation speed at zero or low, etc.) you may notice that condensation starts to form on the windows and windscreen. If there is condensation, use the “Clear View” function to remove it, then use th

 Stop and Start Function

This system enables a reduced fuel consumption and lower greenhouse gas emissions. The system is activated automatically when the vehicle is started. While driving, the system stops the engine (standby) when the vehicle is at a standstill (traffic jam, traffic lights, etc). Conditions for en

© 2016-2025 Copyright Renault Clio Owners Club