Renault Clio manuals

Renault Clio: Turbocharging

Renault Clio III (2005-2013) Service Manual / Engine And Peripherals / Turbocharging

READ NEXT:

 Turbocharging: Precautions for the repair

D4F or K9K I - TURBOCHARGER: GENERAL INSTRUCTIONS For the turbocharging pressure regulator check (see Fault finding - Tests) (Technical Note 3419A, 12B, Turbocharging). WARNING The turbocharger press

 Turbocharger: Removal - Refitting

K9K, and 750 or 752 or 764 or 766 or 768 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Remo

 Turbocharger oil pipe: Removal - Refitting

D4F, and 784 or 786 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect the battery (s

SEE MORE:

 Wheel: Balancing

I - PREREQUISITES FOR WHEEL BALANCING Wheel balancing is a measurement operation. Several conditions must be met to achieve a reliable result in a single operation. The wheel balancer must be installed in accordance with the manufacturer's instructions. It is essential to calibrate the bala

 Drive plate: Removal - Refitting

K4M, and DP0 REMOVAL I - REMOVAL PREPARATION OPERATION Remove the gearbox (see 23A, Automatic gearbox, Automatic gearbox: Removal - Refitting, 23A-7). II - OPERATION FOR REMOVAL OF PART CONCERNED Set up the (Mot. 582-01) (2). Remove: the bolts (2), the drive plate, tool (Mot. 582-01).

© 2016-2025 Copyright Renault Clio Owners Club