{MAINCONT}

Renault Clio: Side Opening Element Mechanisms

READ NEXT:

 Front side door lock: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the door trim (see Front side door trim: Removal - Refitting) (MR 393,72A, Side door trim), the door lock barrel (see 51A, Side opening eleme

 Front side door electric window mechanism: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Remove the front side door trim (see Front side door trim: Removal - Refitting) (72A, Side opening elements trim). Open the access flaps (1) and (2)

 Rear side door lock: Removal - Refitting

B85 or K85 REMOVAL I - REMOVAL PREPARATION OPERATION Remove the door trim (see Rear side door trim: Removal - Refitting) (MR 393, 72A, Side opening element trim). Unclip the access blanking cove

SEE MORE:

  Manual gearbox: Removal - Refitting

JH3 or JR5 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). IMPORTANT During this operation, secure the vehicle to the lift with a strap, to avoid any imbalance. For strapping the vehicle (see 02A, Lifting equipment, Vehicl

  Input shaft lip seal: Removal - Refitting

JH3 or JR5 Replace the lip seal after opening the gearbox (see Technical Note 3661A, gearbox JH - JR). TL4 REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the gearbox (see 21A, Manual gearbox, Manual gearbox: Removal - Refitting, 21A-12), the clutch thrust bearing (see 20A, Clutch, Cl

{VIDEOCONT}
© 2016-2026 Copyright Renault Clio Owners Club - 0.0065