{MAINCONT}

Renault Clio: Starting - Charging

READ NEXT:

 Charge circuit: Specifications

D4F or F4R or K4J or K4M or K9K or M4R ALTERNATOR SPECIFICATIONS Charge circuit: Function D4F or F4R or K4J or K4M or K9K or M4R OPERATION These vehicles are fitted with a built-in regulator and an i

 Alternator: Removal - Refitting

K4J, and STANDARD HEATING - K4M, and STANDARD HEATING REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Remove the air inlet

 Starter: Removal - Refitting

D4F, and 740 or 742 or 764 REMOVAL I - REMOVAL PREPARATION OPERATION Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery). Remove the air filter unit (see 12A, Fuel mi

SEE MORE:

  Engine oil grade

Refer to the Maintenance Service Booklet for your vehicle. Filling: take care when topping up the oil that no oil drips onto engine components - risk of fire. Remember to refit the cap securely as there is a risk of fire if oil splashes onto hot engine components.

  Engine coolant

With the engine switched off and on level ground, the level when cold must be between the MINI and MAXI marks on reservoir 1. Top this level up when cold before it reaches the MINI mark. When working in the engine compartment, ensure that the windscreen wiper stalk is in

{VIDEOCONT}
© 2016-2026 Copyright Renault Clio Owners Club - 0.0043