Renault Clio: Driveshafts

READ NEXT:

 Driveshaft: Precautions for the repair

DP0 or JH3 or JR5 or TL4 WARNING A gearbox oil leak at the driveshaft may destroy it. WARNING Always replace seals whenever the driveshaft is removed. WARNING Grease the base of the bearing using BR 2

 Relay shaft bearing: Removal - Refitting

M4R, and TL4 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect the battery (see Batte

 Front driveshaft gaiter, wheel side: Removal - Refitting

M4R, and TL4 REMOVAL I - REMOVAL PREPARATION OPERATION Remove the driveshaft on the side concerned (see 29A, Driveshafts, Front right-hand driveshaft: Removal - Refitting, 29A-9) or (see 29A, Dr

SEE MORE:

 K4J or K4M or K9K or M4R, and Left-hand Drive

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Remove: the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery). the air filter box (see Air filter unit: Removal - Refitt

 Rear disc bearing: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Put the vehicle on a two-post lift (see Vehicle: Towing and lifting). Remove: the rear wheels (see 35A, Wheels and tyres, Wheel: Removal - Refitting, 35A-1), the rear brake pads (see 33A, Rear axle components, Rear brake pads: Removal - Refitting,

© 2016-2025 Copyright Renault Clio Owners Club