Renault Clio: Driveshafts

READ NEXT:

 Driveshaft: Precautions for the repair

DP0 or JH3 or JR5 or TL4 WARNING A gearbox oil leak at the driveshaft may destroy it. WARNING Always replace seals whenever the driveshaft is removed. WARNING Grease the base of the bearing using BR 2

 Relay shaft bearing: Removal - Refitting

M4R, and TL4 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect the battery (see Batte

 Front driveshaft gaiter, wheel side: Removal - Refitting

M4R, and TL4 REMOVAL I - REMOVAL PREPARATION OPERATION Remove the driveshaft on the side concerned (see 29A, Driveshafts, Front right-hand driveshaft: Removal - Refitting, 29A-9) or (see 29A, Dr

SEE MORE:

 Brake pedal: Removal - Refitting

SCHOOL VEHICLE REMOVAL I - REMOVAL PREPARATION OPERATION Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery). II - OPERATION FOR REMOVAL OF PART CONCERNED 1 - student side Remove: the brake light switch (1) (see 37A, Mechanical component controls, Brake pedal

 Fitting a radio

Radio location 1 Unclip the blanking cover. The aerial, + and – supply and speaker wire connections are located behind it. Door speakers 2 To install any equipment, please consult an authorised dealer. In all cases, it is very important to follow the manufacturer

© 2016-2025 Copyright Renault Clio Owners Club