Renault Clio: 3rd brake light: Removal - Refitting
B85 or C85 or S85
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
- Remove the blanking covers (1).
- Insert a screwdriver in the openings to move the clips (2).
- Apply pressure to the clips (2) to unclip the high level
brake light.
- Partially remove the raised brake light using a flat-blade
screwdriver while protecting the tailgate area
with masking tape.
- Disconnect the connector (3).
- Unclip the window washer jet by moving the clips (4).
- If replacing the high level brake light, remove the
bulb (see 81A, Rear lighting, High level brake
light bulb: Removal - Refitting, 81A-12).
REFITTING
REFITTING OPERATION FOR PART CONCERNED
- If replacing the high level brake light, refit the bulb
(see 81A, Rear lighting, High level brake light
bulb: Removal - Refitting, 81A-12).
- Connect the connector.
- Clip:
- the window washer jet,
- the high level brake light.
- Refit the blanking covers.
K85
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove the tailgate spoiler (see Tailgate spoiler:
Removal - Refitting) (56A, Exterior equipment).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
- Remove:
- the bolts (1) of the high-level brake light on the tailgate,
- The high-level brake light.
- If replacing the high-level brake light, remove the
bulb (see 81A, Rear lighting, High level brake
light bulb: Removal - Refitting, 81A-12).
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- If replacing the high-level brake light, refit the bulb
(see 81A, Rear lighting, High level brake light
bulb: Removal - Refitting, 81A-12).
- Refit the high-level brake light on the tailgate.
II - FINAL OPERATION.
- Refit the tailgate spoiler (see Tailgate spoiler: Removal
- Refitting) (56A, Exterior equipment).
READ NEXT:
K85
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove:
the tailgate spoiler (see Tailgate spoiler: Removal - Refitting),
the high level brake light (see 81A, Rear lighting,
3rd brake light: Rem
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
K85, and DOCUMENTATION PHASE 1
Move the rear fog light using the tool (Car. 1363) as a lever at (1).
B85 or C85 or S85, and DOCUMENTATION
PHASE 2
Interior lighting: Function
I - GENERAL INFORMATION
Vehicles may be fitted with the following units for lighting
the interior of the passenger compartment, depending
on the level of equipment:
a cou
SEE MORE:
K9K, and JA5
REMOVAL
I - REMOVAL PREPARATION OPERATION
IMPORTANT
Before any operation on the sequential system,
discharge the accumulator using the Diagnostic
tool.
To discharge the accumulator, run command
" Discharge pressure accumulator " AC081.
To confirm the pressure drop, read the " Hydr
M4R, and TL4
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove the driveshaft on the side concerned (see
29A, Driveshafts, Front right-hand driveshaft:
Removal - Refitting, 29A-9) or (see 29A,
Driveshafts, Front left-hand driveshaft: Removal
- Refitting, 29A-2).
II - OPERATION FOR REMOVAL OF
© 2016-2024 Copyright Renault Clio Owners Club