Renault Clio: General Information

READ NEXT:

 Brake circuit: Operating diagram

" X " braking system with load-sensitive compensator IMPORTANT This is a diagram of the general principle, do not use it as a reference for take-off points or circuit allocation. When replacing compo

 Braking circuit: Bleed

IMPORTANT To avoid all risk of damage to the systems, apply the safety and cleanliness instructions and operation recommendations before carrying out any repair (see 30A, General information, Brake c

 Underbody heights: Adjustment value

I - MEASURING POINTS Radius under load: (R1) : Distance between the ground and the front wheel shaft (R2) : Distance between the ground and the rear wheel shaft 1 - Front height (W1) (W1) : H

SEE MORE:

 Start button: Removal - Refitting

VEHICLE WITH CARD REMOVAL I - REMOVAL PREPARATION OPERATION Remove the centre console (see Centre console: Removal - Refitting) (MR 393, 57A, Interior equipment). Unclip the trim at (1) and (2). RADIO NO. 01 or RADIO NO. 02 or RADIO NO.03 or RADIO NO. 04 or RADIO NO. 05 or RADIO NO.06 Rem

 Side impact sensor: Removal - Refitting

FRONT SIDE AIRBAG or FRONT SIDE + CURTAIN AIRBAG IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 88C, Air bag and Pretensioners, Airbag and pretensioners: Precautions for the repair, 88C-6). REMOVAL I - REMOVAL PREPARATION OPERAT

© 2016-2025 Copyright Renault Clio Owners Club