Renault Clio manuals

Renault Clio: Wheels And Tyres

Renault Clio III (2005-2013) Service Manual / Chassis / Wheels And Tyres

READ NEXT:

 Wheel: Removal - Refitting

EQUIPMENT LEVEL E3 LEISURE or EQUIPMENT LEVEL EA1 or EQUIPMENT LEVEL EA2 or EQUIPMENT LEVEL EA3 or EQUIPMENT LEVEL EA4 or EQUIPMENT LEVEL EA5 or EQUIPMENT LEVEL EAG The removal - refitting procedure

 Wheel: Balancing

I - PREREQUISITES FOR WHEEL BALANCING Wheel balancing is a measurement operation. Several conditions must be met to achieve a reliable result in a single operation. The wheel balancer must be in

 Tyres: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment). Remove: the wheel in question (see 35A, Wheels and ty

SEE MORE:

 Sunroof opening control: Removal - Refitting

PANORAMIC SUNROOF REMOVAL OPERATION FOR REMOVAL OF PART CONCERNED Unclip the roof opening control using a flat-blade screwdriver (1). Disconnect the connectors. REFITTING REFITTING OPERATION FOR PART CONCERNED Connect the connectors. Clip the sunroof opening control. Sunroof operating mecha

 K4M, and DP0

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). IMPORTANT During this operation, secure the vehicle to the lift with a strap to prevent it from becoming unbalanced. To fit the strap to the v

© 2016-2025 Copyright Renault Clio Owners Club